Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

English
French

Translating step 14

Step 14
Use a T3 Torx driver to remove the two 1.9 mm screws securing the bracket for the Touch Bar display cable connector. Remove the bracket.
  • Use a T3 Torx driver to remove the two 1.9 mm screws securing the bracket for the Touch Bar display cable connector.

  • Remove the bracket.

Dévissez les deux vis Torx T3 de 1,9 mm qui fixent le cache du connecteur de la nappe de l'écran Touch Bar.

Enlevez le cache.

Your contributions are licensed under the open source Creative Commons license.