Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

English
Spanish

Translating step 14

Step 14
Use a T3 Torx driver to remove the two 1.9 mm screws securing the bracket for the Touch Bar display cable connector. Remove the bracket.
  • Use a T3 Torx driver to remove the two 1.9 mm screws securing the bracket for the Touch Bar display cable connector.

  • Remove the bracket.

Usa un destornillador T3 Torx para remover dos tornillos de 1.9 mm que sujetan el soporte para el conector de cable de la pantalla del Touch Bar.

Remueve el soporte.

Your contributions are licensed under the open source Creative Commons license.