Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

English
German

Translating step 14

Step 14
Use a T3 Torx driver to remove the two 1.9 mm screws securing the bracket for the Touch Bar display cable connector. Remove the bracket.
  • Use a T3 Torx driver to remove the two 1.9 mm screws securing the bracket for the Touch Bar display cable connector.

  • Remove the bracket.

Benutze einen T3 Torx Schraubendreher, um die beiden 1,9 mm Schrauben zu entfernen, mit denen die Halterung des Touch Bar Displaykabelsteckers befestigt ist.

Entferne die Halterung.

Your contributions are licensed under the open source Creative Commons license.