Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

English
French

Translating step 11

Step 11
Use a T3 Torx driver to remove the 1.3 mm screw securing the cover bracket for the Touch Bar digitizer connector.
  • Use a T3 Torx driver to remove the 1.3 mm screw securing the cover bracket for the Touch Bar digitizer connector.

Reprenez le tournevis Torx T3 pour retirer la vis qui fixe le cache du connecteur du numériseur de la Touch Bar.

Your contributions are licensed under the open source Creative Commons license.