Skip to main content

Fix Your Stuff

Right to Repair

Store

English
English

MacBook Pro 15" Touch Bar 2018 Lower Case Replacement

Guide Prerequisites

All prerequisite guides must be translated before this translation is considered complete.

Disable Auto Boot

Guide Information

= Done = Incomplete

      Describe the specific part or component of this device you're working on. Ex: Battery

      Create a title.

      This brief summary will only appear in search results.

      Communicate background information before the reader dives into the guide.

      Guide Steps

      Step 1

      Completely power off and unplug your MacBook Pro before you start. Close the display and flip the entire laptop upside-down.

      Step 2

      Press a suction handle into place near the front edge of the lower case, between the screw holes.

      Step 3

      Slide the corner of an opening pick into the gap you just created underneath the lower case.

      Step 4

      Repeat the previous step on the other side, using an opening pick to to release the second clip.

      Step 5

      Lift the front edge of the lower case (the side opposite the display hinge) enough to slide your fingertips underneath and get a good grip on it.

      Step 6

      Pull firmly to slide the lower case towards the front edge of the MacBook (away from the hinge area) to separate the last of the clips securing the lower case.

      Step 7

      Remove the lower case.

      Your contributions are licensed under the open source Creative Commons license.