Skip to main content
English
Chinese

Translating step 4

Step 4
Once you have removed the outer bezel you can start on the LCD panel itself. Now is also a good time to replace the LCD Inverter which is located at the bottom of the LCD.  There is a single screw that holds it in place.  Then there are two cables that plug into the inverter. To remove the LCD screen, remove the screws from the side of the LCD screen.  There should be 4 on each side.
Removing the screen
  • Once you have removed the outer bezel you can start on the LCD panel itself.

  • Now is also a good time to replace the LCD Inverter which is located at the bottom of the LCD. There is a single screw that holds it in place. Then there are two cables that plug into the inverter.

  • To remove the LCD screen, remove the screws from the side of the LCD screen. There should be 4 on each side.

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.