Fix Your Stuff Community Store

Comment installer un SSD de MAC dans un boîtier OWC Envoy Pro

Previous step Next step

Translating step 5

Back to Guide
English
French
Step 5
How Install a Mac SSD into an OWC Envoy Pro Enclosure: step 0, image 1 of 1

  • Use a T5 Torx driver to install the two 7.6 mm screws on the bottom of the enclosure.

Utiliser un tournevis Torx T5 pour visser les deux vis de 7,6 mm en dessous du boîtier.

Your contributions are licensed under the open source Creative Commons license.