Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 38 guides that include this step.

English
German

Translating step 1

Step 1
Use a plastic opening tool to pry the LCD connector from its socket on the logic board. Do not pry against the large IC next to the connector, or you may break it. Gently pry from the side of the connector as shown.
  • Use a plastic opening tool to pry the LCD connector from its socket on the logic board.

  • Do not pry against the large IC next to the connector, or you may break it. Gently pry from the side of the connector as shown.

Heble den LCD Verbinder mit einem Plastiköffnungswerkzeug aus seinem Sockel auf dem Logic Board.

Heble nicht gegen den großen IC neben dem Verbinder, du könntest ihn zerbrechen. Setze vorsichtig seitlich vom Verbinder an, so wie gezeigt.

Your contributions are licensed under the open source Creative Commons license.