Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 39 guides that include this step.

English
Dutch

Translating step 1

Step 1
Remove the three 1.3 mm Phillips #00 screws securing the connector shield to the logic board.
  • Remove the three 1.3 mm Phillips #00 screws securing the connector shield to the logic board.

  • Be sure to not substitute these three screws with any other screws, specifically the screws securing the LCD shield plate to the rear case of the iPad. Any slightly longer screws may strip the screw holes and result in irreparable damage to the logic board.

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.