Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 41 guides that include this step.

English
German

Translating step 2

Step 2
Insert the flat end of a spudger underneath the center of the LCD shield plate from the bottom end of the iPad. Pry up on the spudger to free the plate from the sides of the rear case.
  • Insert the flat end of a spudger underneath the center of the LCD shield plate from the bottom end of the iPad.

  • Pry up on the spudger to free the plate from the sides of the rear case.

Setze das flache Ende eines Spudgers unter die Mitte der LCD Abschirmung von der Unterseite des iPad aus.

Hebele am Spudger hoch, um die Abschirmung aus den Seiten des Gehäuses zu lösen.

Your contributions are licensed under the open source Creative Commons license.