Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 41 guides that include this step.

English
Japanese

Translating step 1

Step 1
Remove the following screws securing the LCD shield plate to the rear case of the iPad:
  • Remove the following screws securing the LCD shield plate to the rear case of the iPad:

  • Two 2.6 mm Phillips #00

  • Thirteen 1.7 mm Phillips #00

  • One additional 1.7 mm Phillips #00 on some devices.

iPadの背面ケースに留められた液晶ディスプレイシールドプレートより次のネジを外します。

2.6 mm #00プラスネジー2本

1.7 mm #00プラスネジー13本

1.7 mm #00プラスネジー1本(デバイスの種類によって有無があります)

Your contributions are licensed under the open source Creative Commons license.