Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 41 guides that include this step.

English
Italian

Translating step 1

Step 1
Remove the following screws securing the LCD shield plate to the rear case of the iPad:
  • Remove the following screws securing the LCD shield plate to the rear case of the iPad:

  • Two 2.6 mm Phillips #00

  • Thirteen 1.7 mm Phillips #00

  • One additional 1.7 mm Phillips #00 on some devices.

Svita le seguenti viti che fissano la protezione del pannello LCD alla copertura posteriore dell'iPad:

Due viti a croce Phillips #00 da 2,6 mm

Tredici viti a croce Phillips #00 da 1,7 mm

Una vite a croce Phillips #00 da 1,7 mm aggiuntiva su alcuni dispositivi.

Your contributions are licensed under the open source Creative Commons license.