Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 41 guides that include this step.

English
French

Translating step 1

Step 1
Remove the following screws securing the LCD shield plate to the rear case of the iPad:
  • Remove the following screws securing the LCD shield plate to the rear case of the iPad:

  • Two 2.6 mm Phillips #00

  • Thirteen 1.7 mm Phillips #00

  • One additional 1.7 mm Phillips #00 on some devices.

Retirez les vis suivantes, fixant la plaque de protection de l'écran LCD à la coque arrière de l'iPad :

Deux vis cruciformes #00 de 2,6 mm

Treize vis cruciformes #00 de 2,6 mm

Une vis cruciforme #00 de 1,7 mm supplémentaire sur certains modèles

Your contributions are licensed under the open source Creative Commons license.