Describe the specific part or component of this device you're working on. Ex: Battery
Create a title.
This brief summary will only appear in search results.
Communicate background information before the reader dives into the guide.
Step 1
Heat the surface of the display with a heatgun for approx. 2 minutes at 200°C.
Step 2
Insert an iFixit Jimmy between the display and the rest of the device, and carefully cut through the adhesive around the phone.
Step 3
Loosen the display, while still applying heat with the heat gun.
Step 4
Remove the cover on the display connector.
Step 5
Remove remnants of the old display and clean the phone.
Step 6
Leave the original liner on the new display. Plug the new display in and test it.
Step 7
Remove the liners.
Step 8
Finished.
Your contributions are licensed under the open source Creative Commons license.