Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 42 guides that include this step.

English
German

Translating step 13

Step 13
Continue with the left side of the LCD: insert the flat end of the spudger between the LCD and shield plate and insert the spudger as far as it will go. At this point the LCD should be loosened from the adhesive holding it. If it is not, re-insert the spudger on the right side or top to fully free the LCD. At this point the LCD should be loosened from the adhesive holding it. If it is not, re-insert the spudger on the right side or top to fully free the LCD.
  • Continue with the left side of the LCD: insert the flat end of the spudger between the LCD and shield plate and insert the spudger as far as it will go.

  • At this point the LCD should be loosened from the adhesive holding it. If it is not, re-insert the spudger on the right side or top to fully free the LCD.

Fahre am der linken Seite des LCD fort: setze das flache Ende des Spudgers so tief wie möglich zwischen das LCD und das Abschrimblech ein.

Jetzt sollte sich die Klebeverbindung des LCD ganz lösen. Wenn nicht, dann setze den Spudger noch ein Mal auf der rechten Seite oder oben ein, bis das LCD endlich ganz frei ist.

Your contributions are licensed under the open source Creative Commons license.