Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 42 guides that include this step.

English
French

Translating step 2

Step 2
The top left LCD screw may be covered by adhesive tape from the front panel. If the tape is present, use the flat end of a spudger to pry the tape up and away, exposing the LCD screw beneath.
  • The top left LCD screw may be covered by adhesive tape from the front panel.

  • If the tape is present, use the flat end of a spudger to pry the tape up and away, exposing the LCD screw beneath.

La vis en haut à gauche du LCD peut être recouverte d'un ruban adhésif venant du panneau frontal.

Dans ce cas, utilisez l'extrémité plate d'un spudger pour tirer le ruban vers le haut et à l'extérieur, accédant ainsi à la vis en dessous.

Your contributions are licensed under the open source Creative Commons license.