Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 42 guides that include this step.

English
German

Translating step 1

Step 1
Small pieces of foam tape cover the top and bottom right-hand screws securing the LCD to the rear case. Use tweezers to peel up and remove the rectangular piece of foam tape covering the top right LCD screw. Remove the triangular tape covering the lower right LCD screw.
  • Small pieces of foam tape cover the top and bottom right-hand screws securing the LCD to the rear case.

  • Use tweezers to peel up and remove the rectangular piece of foam tape covering the top right LCD screw.

  • Remove the triangular tape covering the lower right LCD screw.

Kleine Stückchen geklebten Schaumstoffs verdecken oben und unten rechts Schrauben, die das LCD am Gehäuse befestigen.

Entferne das rechteckige Stückchen Schaumstoff, das die rechte obere Schraube für das LCD verdeckt, mit einer Pinzette.

Entferne das dreieckige Stückchen Schaumstoff, das die rechte untere Schraube für das LCD verdeckt.

Your contributions are licensed under the open source Creative Commons license.