Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 9 guides that include this step.

English
Dutch

Translating step 1

Step 1
The camera bracket is attached to the front panel by adhesive. The use of an iOpener to soften the adhesive is highly recommended.
  • The camera bracket is attached to the front panel by adhesive. The use of an iOpener to soften the adhesive is highly recommended.

  • Follow the iOpener heating instructions described in the iOpener heating section at the beginning of this guide.

  • Be careful not to overheat the iOpener during the repair procedure. We recommend waiting at least two minutes before reheating the iOpener.

  • Place the iOpener over the front facing camera on the front edge of the top of the display.

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.