Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 42 guides that include this step.

English
French

Translating step 27

Step 27
The front-facing camera housing may stick to the front panel; peel up the housing and place it back over the camera to protect it. Rock the camera housing up on one edge to free it from the adhesive and remove it from the front panel. Return the front-facing camera housing to its recess in the rear case.
  • The front-facing camera housing may stick to the front panel; peel up the housing and place it back over the camera to protect it.

  • Rock the camera housing up on one edge to free it from the adhesive and remove it from the front panel.

  • Return the front-facing camera housing to its recess in the rear case.

Le boîtier de la caméra frontale peut rester accroché au panneau frontal. Décollez le boîtier et placez-le sur la caméra pour la protéger.

Faites pivoter le boîtier de la caméra sur un bord pour le libérer de l'adhésif et retirez-le du panneau frontal.

Remettez le boîtier de la caméra à sa place dans la coque arrière.

Your contributions are licensed under the open source Creative Commons license.