Skip to main content
English
German

Translating step 2

Step 2
Remove the 1.7 mm Phillips screw holding the Smart Connector cable cover in place. Remove the Smart Connector cable cover.
Remove the screw securing the smart connector cable cover
  • Remove the 1.7 mm Phillips screw holding the Smart Connector cable cover in place.

  • Remove the Smart Connector cable cover.

Entferne die 1,7 mm Kreuzschlitzschraube, mit der die Abdeckung am Kabel des Smart Connectors befestigt ist.

Entferne die Abdeckung am Kabel des Smart Connectors.

Your contributions are licensed under the open source Creative Commons license.