Skip to main content
English
German

Translating step 23

Step 23
The end of the mid-battery circuit board closer to the Smart Connector is held down with adhesive. Slide an opening pick underneath the mid-battery circuit board, near the Smart Connector.
Slice through the adhesive under the circuit board
  • The end of the mid-battery circuit board closer to the Smart Connector is held down with adhesive.

  • Slide an opening pick underneath the mid-battery circuit board, near the Smart Connector.

  • Carefully slice underneath the board around the post to release the board from the rear case.

Die Platine in der Mitte des Akkus in der Nähe des Smart Connectors ist am Rand unten verklebt.

Schiebe ein Plektrum in der Nähe des Smart Connectors unter diese Platine.

Schneide vorsichtig unter der Platine um den Pfosten herum, so dass sie sich vom Rückgehäuse löst.

Your contributions are licensed under the open source Creative Commons license.