Skip to main content
English
German

Translating step 16

Step 16
Tilt the bottom of the iPad up. Reapply adhesive remover into the gap for the second adhesive strip, located deeper underneath the bottom battery cell. Repeat the application, waiting, and slicing process until the second adhesive strip is separated from the battery.
Repeat the application, waiting, and slicing process
  • Tilt the bottom of the iPad up.

  • Reapply adhesive remover into the gap for the second adhesive strip, located deeper underneath the bottom battery cell.

  • Repeat the application, waiting, and slicing process until the second adhesive strip is separated from the battery.

Kippe die Unterkante des iPads nach oben.

Träufle wieder etwas Klebstoffentferner in den Spalt am zweiten Klebestreifen. Er befindet sich tiefer unter der unteren Akkuzelle.

Wiederhole das Verfahren, also einträufeln, warten, aufschneiden, bis auch der zweite Akkustreifen vom Akku getrennt ist.

Your contributions are licensed under the open source Creative Commons license.