Skip to main content
English
German

Translating step 14

Step 14
Slide a plastic card into the bottom edge of the battery. Push the card in slowly and firmly. Gently wiggle and twist the card to help it slice through the adhesive. If you are struggling, tilt the iPad, apply a few more drops of adhesive remover and wait a minute before trying again.
Slice through the adhesive strip
  • Slide a plastic card into the bottom edge of the battery.

  • Push the card in slowly and firmly. Gently wiggle and twist the card to help it slice through the adhesive.

  • If you are struggling, tilt the iPad, apply a few more drops of adhesive remover and wait a minute before trying again.

Führe eine Plastikkarte in die Unterkante des Akkus ein.

Drücke die Karte langsam und fest hinein. Wackle vorsichtig mit der Karte und verdrehe sie, so dass sie den Kleber auftrennt.

Wenn es schwer geht, dann kippe das iPad, träufle etwas Klebstoffentferner ein und warte ein paar Minuten, bis du es erneut probierst.

Your contributions are licensed under the open source Creative Commons license.