Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 21 guides that include this step.

English
Japanese

Translating step 4

Step 4
Apply heat to the left edge of the iPad for about two minutes, or until it's slightly too hot to touch comfortably. If necessary, re-heat your iOpener for a few seconds or until it's a bit too hot to touch. Be careful not to overheat the iOpener, or it may burst. Insert a second opening pick at the bottom left corner of the iPad.
Slice through the left adhesive
  • Apply heat to the left edge of the iPad for about two minutes, or until it's slightly too hot to touch comfortably.

  • If necessary, re-heat your iOpener for a few seconds or until it's a bit too hot to touch. Be careful not to overheat the iOpener, or it may burst.

  • Insert a second opening pick at the bottom left corner of the iPad.

  • Slide the second opening pick along the left side of the display to separate the adhesive underneath.

  • Leave the opening pick inserted near the top left corner of the iPad to prevent the adhesive from re-sealing.

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.