Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 21 guides that include this step.

English
Italian

Translating step 1

Step 1
Strong adhesive holds the screen in place. In order to separate it, you'll first need to heat and soften the adhesive using an iOpener, hair dryer, or heat gun.
Prepare an iOpener
  • Strong adhesive holds the screen in place. In order to separate it, you'll first need to heat and soften the adhesive using an iOpener, hair dryer, or heat gun.

  • You may need to reapply heat repeatedly throughout this process to prevent the adhesive from cooling and hardening.

  • Prepare an iOpener and place it on the bottom edge of the iPad's screen for about two minutes.

Un tenace adesivo tiene il display ancorato alla sua posizione. Per staccarlo, per rpima cosa dovrai scaldare e ammorbidire la colla utilizzando un iOpener, un asciugacapelli o una pistola termica.

Potresti dover riapplicare il calore ripetutamente durante questa fase per non lasciare che la colla si raffreddi e si indurisca.

Prepara un iOpener e posizionalo sul lato inferiore dello schermo dell'iPad per circa due minuti.

Your contributions are licensed under the open source Creative Commons license.