Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

English
German

Translating step 1

Step 1
Use a thin piece of plastic, spudger, or fingernail (if you have them) to lift up the edge of the grip, and pull up slowly.
  • Use a thin piece of plastic, spudger, or fingernail (if you have them) to lift up the edge of the grip, and pull up slowly.

  • Repeat for the other two grips

  • The large one on the battery-side is the easiest to start with. This is required to remove the front & back panels

  • The small one on the back is a bit difficult to get started, but not really difficult to remove.

  • The one on the AV panel will be easier if you open up the AV port cover.

  • Remove the adhesive like you would rubber cement, just rub your finger against it, it will come off.

  • Optionally throw the balled up adhesive at people pretending its a booger :)

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.