Skip to main content
English
Japanese

Translating step 3

Step 3
CAUTION: Do not yank the casing apart!!! Gently pry from the bottom and work a finger along the side and until monitor pops in half. The speaker cabling is soldered to the main board and the speaker is stuck in the front casing with adhesive.
  • CAUTION: Do not yank the casing apart!!!

  • Gently pry from the bottom and work a finger along the side and until monitor pops in half.

  • The speaker cabling is soldered to the main board and the speaker is stuck in the front casing with adhesive.

  • Lay the two halves as shown.

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.