Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

English
Spanish

Translating step 6

Step 6
Remove the three screws securing the speaker: One 2.7 mm Phillips screw
  • Remove the three screws securing the speaker:

  • One 2.7 mm Phillips screw

  • One 2.9 mm standoff screw

  • One 3.1 mm standoff screw

  • Standoff screws are best removed using an iPhone Standoff bit and driver handle.

  • In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.

Remueve los tres tornillos que sujetan el altavoz:

Un tornillo Phillips de de 2.7 mm

Un tornillo separador de 2.9 mm

Un tornillo separador de 3.1 mm

Los tornillos separadores se remueven mejor utilizando una punta de destornillador para tornillos separadores del iPhone y una manga de destornillador.

Si no hay otra posibilidad, puedes utilizar un destornillador de cabeza plana, pero ten precaución de que no se resbale y dañe los componentes circundantes.

[* black] Remove the three screws securing the speaker:
[* red] One 2.7 mm Phillips screw
[* orange] One 2.9 mm standoff screw
[* yellow] One 3.1 mm standoff screw
- [* icon_note] Standoff screws are best removed using an [product|IF145-343|new_window=true] and [product|IF145-326|driver handle|new_window=true].
+ [* icon_note] Standoff screws are best removed using an [product|IF145-373-71|iPhone Standoff bit|new_window=true] and [product|IF145-419|driver handle|new_window=true].
[* icon_caution] In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.

Your contributions are licensed under the open source Creative Commons license.