Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

English
Dutch

Translating step 2

Step 2
The bracket is lightly adhered in place. Gently lift to unstick and remove the bracket, being careful not to bend it. If necessary, apply a little heat with a hair dryer or heat gun to soften the adhesive. (Putting an iOpener on the bracket is not recommended, as this may bend the spring contacts along the top.)
  • The bracket is lightly adhered in place.

  • Gently lift to unstick and remove the bracket, being careful not to bend it.

  • If necessary, apply a little heat with a hair dryer or heat gun to soften the adhesive. (Putting an iOpener on the bracket is not recommended, as this may bend the spring contacts along the top.)

Het plaatje is lichtjes vastgemaakt.

Til deze voorzichtig omhoog om los te maken en wees voorzichtig dat je 'm hierbij niet buigt.

Indien nodig kun je wat warmte toedienen met een föhn of warmtepistool om de lijm te verzachten. (Het gebruik van een iOpener is niet slim, aangezien dit de veercontacten aan de bovenkant kan buigen.)

Your contributions are licensed under the open source Creative Commons license.