Pebble Time Steel - reparing of a non working button

Guide Information

= Done = Incomplete

      Describe the specific part or component of this device you're working on. Ex: Battery

      Create a title.

      This brief 1-2 sentence summary will appear in search results.

      Communicate background information before the reader dives into the guide.

      Guide Steps

      Step 1

      With opening picks we start to open the watch by lifting up the display bottom from left (about seven o'clock) in counterclockwise direction. In the left side there is a flexband that has to be disconnected.

      Step 2

      Three screws are removed.

      Step 3

      down on the left, a Flexband is carefully folded up and loosened. Below it, another screw is visible.

      Step 4

      Then the board can be removed carefully.

      Step 5

      Now put everything together in reverse order. Remove the sealant before applying the display and stick it around with a new Tesa 61395 Tape 1mm.

      Your contributions are licensed under the open source Creative Commons license.