Skip to main content

Fix Your Stuff

Right to Repair

Store

English
French

Translating step 3

Step 3
Remove the top layer PCB. The PCB must be popped out of place and then angled in such a way that the trigger buttons at the top of the controller slide out of their slots.
Remove the top layer PCB
  • Remove the top layer PCB. The PCB must be popped out of place and then angled in such a way that the trigger buttons at the top of the controller slide out of their slots.

Retirez le PCB de la couche supérieure. Le PCB doit être déplacé hors de son emplacement puis incliné de manière à ce que les boutons de déclenchement en haut du contrôleur glissent hors de leurs emplacements.

Your contributions are licensed under the open source Creative Commons license.