Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

English
Spanish

Translating step 10

Step 10
Remove the speaker. The speaker's adhesive gasket is not reusable. Peel away any remaining adhesive residue with tweezers.
  • Remove the speaker.

  • The speaker's adhesive gasket is not reusable. Peel away any remaining adhesive residue with tweezers.

  • To help protect against water and dust intrusion, replace the adhesive gasket during reassembly. Prep the area by cleaning it with a bit of isopropyl alcohol and a lint-free cloth or coffee filter so that the gasket adheres properly. Install a new gasket onto the speaker, and then install the speaker.

Remueve el altavoz.

La junta de adhesivo del altavoz no se puede volver a utilizar. Despega cualquier residuo de adhesivo con pinzas.

Para proteger del ingreso de agua y polvo, reemplaza la junta adhesiva durante reensamblaje. Prepara el área limpiándola con un poco de alcohol isopropílico y un paño sin pelusa o filtro de café para que la junta se adhiera adecuadamente. Instala una junta nueva el altavoz y luego instala el altavoz.

Your contributions are licensed under the open source Creative Commons license.