Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

English
Chinese

Translating step 1

Step 1
Remove the seven screws securing the bracket below the Taptic engine and speaker:
  • Remove the seven screws securing the bracket below the Taptic engine and speaker:

  • Three Phillips 1.4 mm screws

  • Two Phillips 1.7 mm screws

  • One Phillips 1.9 mm screw

  • One Phillips 1.6 mm screw

卸下固定 Taptic Engine 和主扬声器下方两个支架的七颗螺丝:

三颗 1.4 mm 菲利普斯十字螺丝

两颗 1.7 mm 菲利普斯十字螺丝

一颗 1.9 mm 菲利普斯十字螺丝

一颗 1.6 mm 菲利普斯十字螺丝

Your contributions are licensed under the open source Creative Commons license.