Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Notice: You are editing a prerequisite guide. Any changes you make will affect all 6 guides that include this step.

English
Japanese

Translating step 1

Step 1
Insert the edge of an iPod opening tool into the gap between the outer case and the top bezel. Pry the top bezel off the adhesive securing it to the display retainer.
  • Insert the edge of an iPod opening tool into the gap between the outer case and the top bezel.

  • Pry the top bezel off the adhesive securing it to the display retainer.

  • At this point the hold switch slider is free and may fall. Be careful not to lose it.

iPod用開口ツールの端を、外装ケースと上部のベゼルの隙間に挿入します。

上部のベゼルをディスプレイリテーナに固定している接着剤からはがします。

この時点で、ホールドスイッチスライダは完全に外れており、落下する可能性があります。注意して作業を進めてください。

Your contributions are licensed under the open source Creative Commons license.