Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 9 guides that include this step.

English
Japanese

Translating step 2

Step 2
Use the point of a spudger to pry the battery connector straight up out of its socket. Try not to damage the black silicone seal surrounding this and other board connections. These seals provide extra protection against water and dust intrusion.
Disconnect the battery
  • Use the point of a spudger to pry the battery connector straight up out of its socket.

  • Try not to damage the black silicone seal surrounding this and other board connections. These seals provide extra protection against water and dust intrusion.

  • Bend the connector slightly away from the logic board to prevent it from accidentally making contact with the socket and providing power to the phone during your repair.

スパッジャーの先端を使って、バッテリーコネクタをソケットからまっすぐ引き抜きます。

この周辺と他のボードコネクションの付近に付けられた黒いシリコン製シールにダメージを与えないようご注意ください。これらのシールは防水防塵機能を守るための特別なプロテクションです。

コネクタをロジックボードから離すように曲げて固定します。アクシデントでロジックボードに接続してしまい、作業中、電源が入らないようにするためです。

Your contributions are licensed under the open source Creative Commons license.