Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 9 guides that include this step.

English
German

Translating step 2

Step 2
Use the point of a spudger to pry the battery connector straight up out of its socket. Try not to damage the black silicone seal surrounding this and other board connections. These seals provide extra protection against water and dust intrusion.
Disconnect the battery
  • Use the point of a spudger to pry the battery connector straight up out of its socket.

  • Try not to damage the black silicone seal surrounding this and other board connections. These seals provide extra protection against water and dust intrusion.

  • Bend the connector slightly away from the logic board to prevent it from accidentally making contact with the socket and providing power to the phone during your repair.

Heble den Akkustecker mit der Spudgerspitze aus seinem Anschluss.

Versuche, die schwarze Silikondichtung um diesen und die anderen Stecker nicht zu beschädigen. Diese Dichtungen gewährleisten einen zusätzlichen Schutz vor Wasser und Staub.

Biege den Stecker leicht vom Logic Board weg, um zu vermeiden, dass er sich versehentlich wieder mit dem Anschluss verbindet und so dein iPhone während der Reparatur mit Strom versorgt.

Your contributions are licensed under the open source Creative Commons license.