Fix Your Stuff Community Store

拆开步骤

Notice: You are editing a prerequisite guide. Any changes you make will affect all 9 guides that include this step.

Previous step Next step

Translating step 11

Back to Guide
English
Chinese
Step 11
Opening Procedure: step 0, image 1 of 3 Opening Procedure: step 0, image 2 of 3 Opening Procedure: step 0, image 3 of 3

  • The top edge of the display is secured with both glue and clips.

  • Slide the opening pick around the top corner of the display, while gently pulling or wiggling the display down in the direction of the Lightning port.

  • The clips will break if you use too much force. Work carefully and be patient.

  • Don't insert your pick more than 3 mm, as you may damage the front panel sensor array.

  • Slide the pick to the opposite corner and cut any remaining adhesive securing the display.

显示屏的上边缘由胶水与卡扣一同固定。

在显示屏的上角划动塑料拨片，并轻轻地向下朝闪电接口方向拉动或者滑动显示屏。

若用力过猛可能会损坏卡扣，请小心操作。

请勿将撬片尖端插入超过 3 毫米，否则可能会损坏前面板传感器阵列。

划动塑料拨片至另一边角以划开剩下的固定胶。

Your contributions are licensed under the open source Creative Commons license.