Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
German

Translating step 2

Step 2
Carefully lift the connector for the LED indicator light straight up to disconnect it from its socket on the logic board. Take care not to pry under the socket, or you may break it off the board.
  • Carefully lift the connector for the LED indicator light straight up to disconnect it from its socket on the logic board.

  • Take care not to pry under the socket, or you may break it off the board.

Hebe vorsichtig den Stecker der Status-LED gerade hoch und löse ihn aus seinem Anschluss auf dem Logic Board.

Heble nicht unter dem Anschluss, du könntest ihn sonst aus dem Logic Board herausbrechen.

Your contributions are licensed under the open source Creative Commons license.