Skip to main content

Fix Your Stuff

Right to Repair

Store

English
Japanese

Translating step 6

Step 6
Finally, press the top edge of each RAM module to swing it down toward the logic board until the retaining clips on each side snap into place. If the rubber guards interfere with the clips, spread the rubber guards away from the RAM with one hand and use the other to angle the RAM modules into place. Then, release the guards. Check the clips and make sure both modules are fully seated and secure.
  • Finally, press the top edge of each RAM module to swing it down toward the logic board until the retaining clips on each side snap into place.

  • If the rubber guards interfere with the clips, spread the rubber guards away from the RAM with one hand and use the other to angle the RAM modules into place. Then, release the guards.

  • Check the clips and make sure both modules are fully seated and secure.

最後に、各RAMの上部端を手で支えながら、両側がカチッと音がしてしっかり装着するまでロジックボード側に向けて押し込みます。 

ラバーガードがクリップの邪魔になる場合は、片手でRAMからラバーガードを広げて、もう一方の手でモジュラーRAMを装着します。それからガードから手を放します。

クリップを確認して、両側のモジュラーがしっかりと固定されているか点検してください。

Your contributions are licensed under the open source Creative Commons license.