Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect the guide that includes this step.

English
German

Translating step 3

Step 3
Use a T10 Torx driver to remove the two 7.5 mm screws securing the logic board. Use a T10 Torx driver to remove the two 7.5 mm screws securing the logic board.
  • Use a T10 Torx driver to remove the two 7.5 mm screws securing the logic board.

Drehe die beiden 7,5 mm Torx T10 Schrauben heraus, mit denen das Logic Board befestigt ist.

Your contributions are licensed under the open source Creative Commons license.