Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 2 guides that include this step.

English
German

Translating step 3

Step 3
Use a T6 Torx driver to remove the 2.8 mm screw securing the antenna cable to the Mac mini's logic board. Use a T6 Torx driver to remove the 2.8 mm screw securing the antenna cable to the Mac mini's logic board.
  • Use a T6 Torx driver to remove the 2.8 mm screw securing the antenna cable to the Mac mini's logic board.

Entferne die 2,8 mm Torx T6 Schraube, die das Antennenkabel am Logic Board des Mac Mini befestigt.

Your contributions are licensed under the open source Creative Commons license.