Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 22 guides that include this step.

English
Italian

Translating step 2

Step 2
Use the flat end of a spudger to disconnect the USB-C port cable bracket by prying it straight up from the logic board. To reconnect this cable, first line up the metal bracket over the screw holes, then press down on the middle of the bracket. Make sure it's aligned correctly, or you may damage the connector.
  • Use the flat end of a spudger to disconnect the USB-C port cable bracket by prying it straight up from the logic board.

  • To reconnect this cable, first line up the metal bracket over the screw holes, then press down on the middle of the bracket. Make sure it's aligned correctly, or you may damage the connector.

Usa la parte piatta di uno spudger per scollegare la staffa del cavo della porta USB C sollevandola dalla scheda madre.

Per ricollegare questo cavo, prima allinea la staffa in metallo coi fori delle viti, quindi premila al centro. Assicurati sia allineata correttamente, o potresti danneggiare il connettore.

Your contributions are licensed under the open source Creative Commons license.