Skip to main content

Fix Your Stuff

Right to Repair

Store

English
German

Translating step 1

Step 1
With a Philips #00 Screwdriver bit, remove one 4 mm long black screw located by the antenna connections on the wireless card.
  • With a Philips #00 Screwdriver bit, remove one 4 mm long black screw located by the antenna connections on the wireless card.

  • Set the screw and metal holder aside.

Drehe die einzelne 4 mm Kreuzschlitzschraube #00 am Antennenanschluss auf der WLAN-Karte heraus.

Lege die Schraube und den Metallhalter zur Seite.

Your contributions are licensed under the open source Creative Commons license.