Skip to main content

Fix Your Stuff

Right to Repair


Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.


Translating step 1

Step 1
Turn the laptop upside down.
  • Turn the laptop upside down.

  • Make sure the laptop is turned off.

  • Using a T5 Torx Screwdriver, remove the ten 3 mm long screws from the perimeter of the back of the laptop.

Lege den Laptop mit der Unterseite nach oben hin.

Stelle bitte sicher, dass der Laptop tats├Ąchlich ausgeschaltet ist.

Entferne die zehn 3 mm Torx T5 Schrauben vom Rand des Laptops.

Your contributions are licensed under the open source Creative Commons license.