Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
Italian

Translating step 3

Step 3
Fully open the screen and stand your MacBook Pro up on one side. While steadying the MacBook pro with your free hand, remove the three T8 Torx screws from the lower display hinge.
  • Fully open the screen and stand your MacBook Pro up on one side.

  • While steadying the MacBook pro with your free hand, remove the three T8 Torx screws from the lower display hinge.

  • Remove the remaining three T8 Torx screws from the lower display bracket.

Apri il MacBook Pro di poco più di 90° e disponilo di taglio sul tavolo, come nell'immagine.

Mentre reggi il display con la mano sinistra, rimuovi le tre viti Torx T9 dalla staffa superiore del display.

Accertati che il display e il case superiore siano ben bilanciati e non cadano, evitando così danni potenziali ad altri componenti.

Rimuovi le tre viti Torx T9 rimaste dalla staffa inferiore del display.

[* icon_note] OpenFully open the screen and stand your MacBook Pro a little wider than 90 degrees, and place itup on end on the table, as shownone side.
[* red] While holdingsteadying the displayMacBook pro with your left handfree hand, remove the three T9T8 Torx screws from the upperlower display bracket.
[* icon_caution] Be sure the display and upper case are balanced and will not fall over, potentially damaging other components
hinge.
[* orange] Remove the remaining three T9T8 Torx screws from the lower display bracket.
[* icon_note] OpenFully open the screen and stand your MacBook Pro a little wider than 90 degrees, and place itup on end on the table, as shownone side.
[* red] While holdingsteadying the displayMacBook pro with your left handfree hand, remove the three T9T8 Torx screws from the upperlower display bracket.
[* icon_caution] Be sure the display and upper case are balanced and will not fall over, potentially damaging other components
hinge.
[* orange] Remove the remaining three T9T8 Torx screws from the lower display bracket.

Your contributions are licensed under the open source Creative Commons license.