Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
French

Translating step 3

Step 3
Fully open the screen and stand your MacBook Pro up on one side. While steadying the MacBook pro with your free hand, remove the three T8 Torx screws from the lower display hinge.
  • Fully open the screen and stand your MacBook Pro up on one side.

  • While steadying the MacBook pro with your free hand, remove the three T8 Torx screws from the lower display hinge.

  • Remove the remaining three T8 Torx screws from the lower display bracket.

Ouvrez le MacBook Pro d'un peu plus de 90 degrés et posez-le debout sur la table, comme illustré.

Tout en maintenant l'écran de votre main gauche, retirez les trois vis Torx T9 restantes du support supérieur de l'écran.

Assurez-vous que l'écran et le boîtier supérieur sont stables et ne risquent pas de tomber, ce qui pourrait endommager chaque composant.

Dévissez les dernières vis Torx T9 du support inférieur de l'écran.

[* icon_note] OpenFully open the screen and stand your MacBook Pro a little wider than 90 degrees, and place itup on end on the table, as shownone side.
[* red] While holdingsteadying the displayMacBook pro with your left handfree hand, remove the three T9T8 Torx screws from the upperlower display bracket.
[* icon_caution] Be sure the display and upper case are balanced and will not fall over, potentially damaging other components
hinge.
[* orange] Remove the remaining three T9T8 Torx screws from the lower display bracket.
[* icon_note] OpenFully open the screen and stand your MacBook Pro a little wider than 90 degrees, and place itup on end on the table, as shownone side.
[* red] While holdingsteadying the displayMacBook pro with your left handfree hand, remove the three T9T8 Torx screws from the upperlower display bracket.
[* icon_caution] Be sure the display and upper case are balanced and will not fall over, potentially damaging other components
hinge.
[* orange] Remove the remaining three T9T8 Torx screws from the lower display bracket.

Your contributions are licensed under the open source Creative Commons license.