Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 7 guides that include this step.

English
Spanish

Translating step 3

Step 3
Use a spudger or a clean fingernail to pry the battery connector up from its socket on the logic board. Try not to damage the black silicone seal surrounding this and other board connections. These seals provide extra protection against water and dust intrusion.
  • Use a spudger or a clean fingernail to pry the battery connector up from its socket on the logic board.

  • Try not to damage the black silicone seal surrounding this and other board connections. These seals provide extra protection against water and dust intrusion.

  • Bend the connector slightly away from the logic board to prevent it from accidentally making contact with the socket and providing power to the phone during your repair.

Usa un spudger o tu uña limpia para levantar el conector de batería de su zócalo en la placa lógica.

Trata de no dañar el sello de silicona negro que rodea esta y otras conexiones de la placa. Estos sellos proporcionan protección adicional contra la entrada de agua y polvo.

Dobla el conector ligeramente hacia afuera de la placa lógica para evitar que haga contacto accidentalmente con el zócalo y proporciona energía al teléfono durante su reparación.

Your contributions are licensed under the open source Creative Commons license.