Skip to main content
English
Japanese

Translating step 29

Step 29
Move back to the passenger side. Remove the gas tank old gasket.  I was able to slide this over the assembly without needing to remove it. Likewise, install a new gasket (shown in orange here).  Again, I could slip this over the existing assembly without much effort.
  • Move back to the passenger side.

  • Remove the gas tank old gasket. I was able to slide this over the assembly without needing to remove it.

  • Likewise, install a new gasket (shown in orange here). Again, I could slip this over the existing assembly without much effort.

  • Clean the mating surface of the gasket before installation to ensure a good seal.

  • Push the assembly back into place. The assembly has a tab to align it to the proper direction.

  • Do not make any connections yet.

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.