Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

English
Spanish

Translating step 8

Step 8
Remove the 2.8 mm T5 Torx screw securing the three antenna coax cables to the main board.
  • Remove the 2.8 mm T5 Torx screw securing the three antenna coax cables to the main board.

Remueve el tornillo T5 Torx de 2.8 mm que sujetan los tres cables coaxiales a la placa madre.

[* red] Remove the 2.8 mm T5 Torx screw securing the three antenna coax cables to the main board.
[* red] Remove the 2.8 mm T5 Torx screw securing the three antenna coax cables to the main board.

Your contributions are licensed under the open source Creative Commons license.