Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

English
Italian

Translating step 6

Step 6
Remove the four 3.9 mm T5 Torx screws on both sides, which secure the antenna cable assembly. Also remove the twelve 1.1 mm P2 pentalobe screws on both sides.
  • Remove the four 3.9 mm T5 Torx screws on both sides, which secure the antenna cable assembly.

  • Also remove the twelve 1.1 mm P2 pentalobe screws on both sides.

Rimuovi le quattro viti Torx T5 da 3,9 mm che fissano il gruppo del cavo dell'antenna da entrambi i lati.

Rimuovi anche le 12 viti P2 da 1,1 mm presenti su entrambi i lati.

[* red] Remove the four 3.9 mm T5 Torx screws on both sides, which secure the antenna cable assembly.
[* orange] Also remove the twelve 1.1 mm P2 pentalobe screws on both sides.
[* orange] Also remove the twelve 1.1 mm P2 pentalobe screws on both sides.

Your contributions are licensed under the open source Creative Commons license.